Non-overloading motor-No extemal overload control required. Always refer to name plate date.
Technical Data
1. Suitable Fluids
Heating water to VDI 2035
Water/glycol mixtures: max. Mixing ratio 1:1
Hydrate coercions required for mixing ratio above 20%
2.Performance
Speed range: 1100-2200pm
Manual 3-speed control
Fluid temperature range:-10°C-+110°C
Max. Working prossure: 10 bars
3.Ambient Temperature
Permissible up to:40°C
4.Power
Mains power: 1~230V, 50Hz
5.Motor
Degree of protection:IP42
Insulation class: 1
Interference emission: EN 50081-1
Interference resistance: EN 50082-2
6.Construction Materials
Pump body: cast iron
Impeller: GF-PP
Shaft: stainless steel
Bearings: graphite
Scope of supply
Pump incl.2 union washers, packing and O&M manual
Accessories
Union connector fittings, thermal insulation
Mounting Positions
Pump shaft in the horizontal plane, terminal box optionally 3,6,9 or 12o’clock
Pump Equipment
Screwed end single head pump
Manual 3-speed control
Non-overloading single-phase motor
Optional left or right cable entry
Special design versions RS25/4 and RS25/6
Bronze body, 180mm port-to-port
Cast iron body 130 mm port-to-port